Constant hangers /Constant supports

Application | Function | Constant Hanger selection | Qualification
Travel Stop | Adjustment | Installation instructions | Name plate


Installation instructions

A) Securely attach the hanger to the building structure at a point where the load coupling is directly over the desired point of attachment.

B Make certain that the moving parts of the hanger will be unobstructed.

C) Make certain that the rod has enough thread engagement before taking up the load.

D) Turn the load coupling until the travel stop is free.

E) Prior to the final start-up please remove the travel stop.

F) After the line is in operation, check the hanger for indicated hot position. If necessary, make adjustment by turning the load coupling to bring the indicator to the hot position. No other adjustment is normally required since the load as calibrated at the factory is equal to the load specified to be supported.